39
Function
Description
Auto Power On
Computer
Selecting
Enable
allows the projector to turn on automatically
once the VGA signal is fed through the VGA cable.
Direct Power On
Selecting
On
allows the projector to turn on automatically
once the power is fed through the power cord.
Smart Energy
Auto Power Off
See
"Setting Auto Power Off" on page 45
for details.
Sleep Timer
See
"Setting Sleep Timer" on page 45
for details.
Power Saving
See
"Setting Power Saving" on page 46
for details.
Smart Restart
Selecting
Enable
enables you to restart the projector
immediately within 120 seconds after turning it off. After 120
seconds, if the projector is not turned on again, it will directly
enter the standby mode.
It takes some time to initiate this function. Make sure
the projector has been turned on for more than 4
minutes. If the projector is resumed by using the Smart
Restart feature, this function can be executed
immediately.
When Enable is selected, the Quick Power Off function
will be automatically set to “Enable”.
Quick Power
Off
Selecting
Enable
enables the function and the projector will
not enter the cooling process after being shut down. Selecting
Disable
disables the function and the projector will enter
normal cooling process after being shut down.
If you attempt to restart the projector right after it’s been
turned off, it may not be turned on successfully and will
rerun its cooling procedure.
When Disable is selected, the Smart Restart function
will be automatically turned off.
3. POW
E
R
MA
NAGE
M
EN
T menu
Summary of Contents for PX800HD
Page 77: ......
