37
Using the 3D functions
This projector features 3D function which enables you to enjoy 3D movies, videos, and
sporting events in a more realistic way by presenting the depth of the images. You need to
wear a pair of 3D glasses to view 3D images.
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the
signal for
3D Sync
information and once detected, it projects images in 3D format
automatically. In other cases, you may need to manually select a
3D Sync
format for the
projector to project 3D images correctly.
To select a
3D Sync
format:
1.
Press
MENU/EXIT
on the projector or
Menu
on the remote control and then press
/ until the
DISPLAY
menu is highlighted.
2.
Press
to
highlight
3D Settings
and press
MODE/ENTER
on the projector or
Enter
on the remote control.
3.
Press
to
highlight
3D Sync
and press
MODE/ENTER
on the projector or
Enter
on the remote control.
4.
Press
to select a
3D Sync
setting according to the table below and then press
MODE/ENTER
on the projector or
Enter
on the remote control to confirm.
When the 3D Sync function is on:
•
The brightness level of the projected image will decrease.
•
The Color Mode cannot be adjusted.
•
The Zoom can only magnify the pictures to limited sizes.
If you discover the inversion of the 3D image depth, set the 3D Sync Invert function to “Invert”
to correct the problem.
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SYSTEM SETTING: BASIC
>
Standby Settings
, and the cable connections are correctly
made. For the connection methods, see the Connection chapter.
Power Saving
Less than 0.5W power consumption when
Power Saving
mode is turned on.
When Off is selected, the projector is able to provide 5V/1A power in standby mode.
Active VGA Out
Selecting
On
outputs a VGA signal when the
COMPUTER IN
and
COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from
COMPUTER IN
.
Active Audio Out
Selecting
On
outputs an audio signal when the
AUDIO IN
and
AUDIO OUT
sockets are
correctly connected to devices.
Quick Power Off
Selecting
On
enables the function and the projector will not enter the cooling process after
being shut down. Selecting
Off
disables the function and the projector will enter normal
cooling process after being shut down.
Summary of Contents for PJD7822HDL
Page 86: ......
