1.3
PJD6211 Lamp Specification
Product Scope
The product is a lamp system consisting of a short arc burner within a reflector and electronic lamp
driver.
Type lamp
P-VIP 180/0.8 E20.8 open type
Identcode :
A 599 899
Type driver PT VIP O3 MID(180W)-UNISHAPE
Identcode :
A581 105 (lock type,Gen5,VC,SL)
A581 111 (lock type,Gen5,VC,DL)
The lamp must be operated with the OSRAM lamp driver only.
Initial Characteristics
nominal
tolerance
Input Voltage 380V DC 3 20…400V DC
Standby(non-operating)
120…400V DC
Max. slew rate of input voltage
During switch on 30V
μs
Input Current 0.55A
Max. input voltage ripple
30V
pp
@ 100-120Hz
Max. input current ripple 1Arms@40 -300kHz
Input Wattage
max.210W@180W lamp wattage
Input Wattage standby operation 1, 7W @380V DC
Output Wattage
nominal
180W
3%
7
DIM mode 1 60W
3%
6
controlled by UART
160W…180W in step with of 1/128 of nominal power
Output current limitation 3.4A(RMS)
5%
Ignition pulse typ.2.6kVpeak symm. 2.4 …3.5 kVpeak
Ignition Phase Duration typ.3. 5s max.6 s
Enable-Disable-Enable Cycle 15 s minimum
Acoustic sound pressure level
typical acoustic sound pressure level 36 dB(A),maximum
38dB(A) at 25cm measuring distance; measured in ste ady
state lamp operation
8
Acoustic sound power level typical acoustic sound power level 32 dB(A) acc. to EN ISO
3744; measured in steady state lamp operation
7
Switch-off lamp voltage
140V
5V
Cooling method forced air cooling at
1.5 m/s minimum
Thermal Protection Tc1 switch point 90
5
ViewSonic Corporation
Confidential - Do Not Copy
PJD
62
11
7
