![ViewSonic PJ655D User Manual Download Page 14](http://html1.mh-extra.com/html/viewsonic/pj655d/pj655d_user-manual_1021751014.webp)
Powering Off the Projector
1.
Press the Power/Standby button to turn off the projector
lamp.
2.
After pressing the Power/Standby button, you will see a
message Power off the lamp? on the on-screen display.
Press the Power/Standby button again to confirm.
Otherwise the message will disappear after 5 seconds.
3.
Power/Standby LED indicator will light solid amber for
about 30 seconds. After the Power/Standby indicator
starts flashing, you can turn off the main power switch on
the side of the projector.
If you want to turn on the projector again, you must press
the Power/Standby button within 90 seconds of the
indicator flashing.
4.
Do not turn on the projector immediately following a power
off procedure.
v
When the LAMP indicator flashs green for about 10 seconds,
you will see a message Fan Fail on the on-screen display. Please
contact your local dealer or our service center.
v
When the TEMP indicator lights solid orange, it indicates the
projector has been overheated. You will see a message Over
Temperature on the on-screen display. The projector will
automatically shut itself down.
Under normal conditions, the projector can be switched on again
for your presentation. If the problem persists, you should contact
your local dealer or our service center.
V iewSonic
PJ655D
12
Summary of Contents for PJ655D
Page 43: ...ViewSonic Corporation...