ViewSonic N3735w-2M, Service Manual

Page: 20 / 100

ENGLISH
Viewing the Menus
1. Press the
MENU
button to display the OSD main menu.
There are five top menus on the screen: Video, Audio,
TV, Setup, Parental. When in VGA source, there is no
TV menu.
2. Press ▲ or ▼ to select your desired top menu.
3. Press
ENTER
or ► to enter the menu you select.
4. Use ▲▼ to select the control you want to adjust.
5. When selecting the control with
II
►, press
ENTER
or
► to enter next level menu or to enable the function.
6. Press ◄ or ► to adjust or select the settings.
7. Press
MENU
to return to the previous page or exit from
the OSD menu.
Selecting the Input Source
To select the TV or other external input sources connected
to the TV.
1. Press the
INPUT
button on the remote control.
2. Press ▲ or ▼ to select the required input source
between TV, AV, S-Video, YPbPr 1, YPbPr 2, VGA,
HDMI 1, or HDMI 2.
3. To confirm the selection, press
ENTER
.
Storing Channels into Memory
1. Press the
MENU
button to display the OSD main menu.
2. Press ▲ or ▼ to select the “TV” menu.
Press
ENTER
or ► to enter the menu.
Press ▲ or ▼ to select “Tuner Mode”, and use ◄ or ►
to select the antenna connection to “Air” or “Cable”.
Air: RF signal programs by “Air”.
Cable: RF signal programs by “Cable”.
3. Press ▲ or ▼ to select “Auto Scan”, then press
ENTER
or ► to perform Auto Scan function.
To stop scanning, press
MENU
at any time.
4. The Auto Scan screen will be shown, and after it is
done, the screen will return to the first found channel.
ViewSonic Corporation
Confidential - Do Not Copy
N
3735
w-
2M
17