ViewSonic
N3251w
10
ENGLISH
2. Connecting RF antenna, Cable TV Wire or DTV cable
Make sure the power is OFF before installing your LCD TV.
1) TV:
Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial
cable. Preset the TV channels into memory with
Auto Scan
function when
using an antenna or cable TV system without a cable connecter box (See
page 19).
Installation
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
1. Insert Remote Control Batteries
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
•
•
•
•
•
•
RF Cable or Adapter
(not supplied)
Summary of Contents for N3251W
Page 10: ...ViewSonic N3251w 8 ENGLISH Remote Control ...
Page 35: ...ViewSonic ...
