ViewSonic LS700HD, User Manual

Page: 78 / 84

71 69
69
No. Function Type Action Command Response The response of Query Read command
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
Remote
Control
Code
Write code 8 0x06 0x14 0x00 0x04 0x00 0x34 0x0C
0x48 0x07 0xA7
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x07
0x1E
Remote
Control
Read Status 0x07 0x14 0x00 0x05 0x00 0x34 0x00
0x00 0x0C 0x48 0xA1
0x05 0x14 0x00 0x03 0x00 0x00
0x00 0x00 0x17
Over Scan Write OFF 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x00 0x90
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x00
0x17
Over Scan Write Value 1 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x01 0x91
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x01
0x18
Over Scan Write Value 2 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x02 0x92
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x02
0x19
Over Scan Write Value 3 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x03 0x93
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x03
0x1A
Over Scan Write Value 4 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x04 0x94
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x04
0x1B
Over Scan Write Value 5 0x06 0x14 0x00 0x04 0x00 0x34 0x11
0x33 0x05 0x95
0x03 0x14 0x00 0x00 0x00 0x14 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x05
0x1C
Over Scan Read Get Value 0x07 0x14 0x00 0x05 0x00 0x34 0x00
0x00 0x11 0x33 0x91
0x05 0x14 0x00 0x03 0x00 0x00
0x00 0x00 0x17
Remote Key Write Menu 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x0F 0x61
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Exit 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x13 0x65
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Top 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x0B 0x5D
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Bottom 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x0C 0x5E
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Left 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x0D 0x5F
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Right 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x0E 0x60
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Source 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x04 0x56
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Enter 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x15 0x67
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write Auto 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x08 0x5A
0x03 0x14 0x00 0x00 0x00 0x14
Remote Key Write My Button 0x02 0x14 0x00 0x04 0x00 0x34 0x02
0x04 0x11 0x63
0x03 0x14 0x00 0x00 0x00 0x14
AMX Write AMX
response
AMX AMXB<-SDKClass=VideoProjec
tor><-Make=ViewSonic><-Mode
l=PX800HD>
Operating
emperature
Read Get Value 0x07 0x14 0x00 0x05 0x00 0x34 0x00
0x00 0x15 0x03 0x65
0x05 0x14 0x00 0x0A 0x00 0x00
0x00 0x29 0x01 0x00 0x00 0x00
0x00 0x00 0x00 0x48
See note 1
Lamp mode
cycle
Write Lamp mode
cycle
0x06 0x14 0x00 0x04 0x00 0x34 0x13
0x36 0x00 0x95
0x03 0x14 0x00 0x00 0x00 0x14
173
174
Note:
1. Operating temperature value format:
Response : 0x05 0x14 0x00 0x0A 0x00 0x00 0x00 0x29 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x48(checksum)
Value : Byte7~Byte10
0xaa 0xbb 0xcc 0xdd -> HEX2DEC(ddccbbaa)/10 -> real temperature degree
Ex. “0x29 0x01 0x00 0x00” -> 0x00000129 =297 -> 29.7
ﾟ
C .
71
70
2.
Error response status
：
(Only for service debug) :
Response : 0x05 0x14 0x00 0x16 0x00 0x00 0x00 ErrorStatus(20 Items) checksum
1
．
Item 0 ~17: 1 byte.
2
．
Item 18 : First burn In error minutes
，
4 Bytes.
3
．
Item 19: Lamp Status
，
1 Byte.
4
．
Item 20: Lamp error status
，
2 Bytes.
Total : 32 Bytes
。
3.
When the projector response the code “ 0x00 0x14 0x00 0x00 0x00 0x14” at the first byte “0x00” , it indicate that function is disable (grey out).
For example when there are no source inputs to projector, the function “Aspect Ratio” is greyed out and can’t be controled by user via OSD
menu or RC.
4. HDMI Range:

Enhanced = 0 – 255 steps

Normal = 16 -235 steps
5. This function is only applied some models due to LAN solution.
Status explanation:
Power On: System is finished all HW/FW settings and ready to work.
Warm Up: System is at initial stage to set and check HW/FW environment. Please do not perform other commands.
Cool Down: System is at final stage to close HW/FW environment. Please do not perform other commands.
Power Off: System is turned off all HW/FW except MCU or LAN functions with LAN standy setting.
*This command is only applied to particular models, please refer to User Guide.
6. The “Mute” function is only active when there is an input source applied.
The “Auto Adjust” function is only active when there is an input source of non-digital type applied, such as VGA/Computer1/D-sub.