105
Certain components of products as stated above are exempted under the Annex
III of the RoHS2 Directives as noted belowE
• Copper alloy containing up to 4% lead by weight.
•
Lead in high melting temperature type solders (i.e. lead-based alloys containing
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
• Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC
or higher.
ENERGY STAR® statement
ENERGY STAR® is a U.S. Environmental Protection Agency voluntary program
that helps businesses and individuals save money and protect our climate
through superior energy efficiency. Products that earn the ENERGY STAR®
prevent greenhouse gas emissions by meeting strict energy efficiency criteria or
requirements set by the U.S. Environmental Protection Agency.
As an ENERGY STAR® Partner, ViewSonic is determined to meet the ENERGY STAR®
Guidelines and mark all certified models with the ENERGY STAR® logo.
The following logo appears on all ENERGY STAR®-certified models:
NOTE:
The power management features significantly reduce energy
consumption when the product is not in use. Power management allows
the device to automatically enter a low power “sleep” mode after a
defined period of inactivity. And the power management features also
enter Sleep Mode or Off Mode within 5 minutes of being disconnected
from a host computer. Please note any change in energy settings will
increase energy consumption.
Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies
with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for
the exemptions set in Schedule 2 of the Rule.