background image

E

N

G

L

I

S

H

ViewSonic E655

LIMITED  WARRANTY

VIEWSONIC E655 MONITORS

What the warranty covers:

ViewSonic

®

 warrants its products to be free from defects in material and workmanship during the

warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:
 ViewSonic E655 color monitors, including the display tubes, are warranted for three (3) years for all
parts and three (3) years for all labor from the date of the first consumer purchase.

Who the warranty protects:
This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:

a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  product

modification, or failure to follow instructions supplied with the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.

3. Removal, installation, and set-up service charges.

How to get service:
1. For information on obtaining warranty service, call ViewSonic. The customer support telephone

numbers are: U.S. and Canada 

1-800-688-6688

; from outside the U.S. and Canada 

909-869-7976;

from Europe 

011-44 (1) 293-643-900;

 from Asian /Pacific Rim countries 

886 (2) 248-4072

.

Internet E-Mail address:[email protected] or World Wide Web:http://www.viewsonic.com

2. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your

name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

3. Take or ship the product prepaid in the original container to your ViewSonic dealer, any ViewSonic

service center or ViewSonic.

4. For additional information or the name of the nearest ViewSonic service center, contact your

ViewSonic dealer or ViewSonic.

Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusion of damages:
VIEWSONIC
’S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT.  VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES

BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH Df0 -1m4Ar

Summary of Contents for E655

































Reviews: