![background image](http://html1.mh-extra.com/html/viewsonic/cdx5560/cdx5560_user-manual_1020207041.webp)
32
After-Images can still be
seen on the display after
the display is powered off.
(Examples of still pictures
include logos, video games,
computer images, and images
displayed in 4:3 normal mode)
A still picture is displayed for an
over extended period of time
Do not allow a still image to be
displayed for an extended period of
time as this can cause a permanent
after-image to remain on the
display.
How to setup the settings in
the menu to control all the
monitors at the same time and
individually via RC?
Daisy chained by RS232 and no IR
cable
1.The fìrst display sets as “Primary”
on OSD (Advanced option/IR control
item), others set as “Secondary”.
2.The setup OSD will show on Top-
Left of display.(Toggle MENU will
show again if it disappear)
3. Default setting: ID NO: 0, GP
NO: 0, this setting can control all
displays by IR.
The “+”, “-” can change “ID NO” to
control signal display by “Monitor
ID”.
The “UP”, “DOWN” can change
“GP NO” to control multi-display by
“Group ID”.
*The fìrst display always be
controlled by IR.
How is the RC working?
Daisy chain : no RS232 connected
and IR cable
No need setting, just to connect
with IR cables and control by IR.
*This way has out-of-synchronizm
phenomenon. Suggest to use above
setting with RS-232 cable.
Summary of Contents for CDX5560
Page 60: ...51...