6
8
[ADJUST] button
Press to run the Auto Adjust function.
NOTE:
This button is functional for VGA input only.
9
[ ] button
Press to move the se
lec
tion down in OSD menu.
10
[ ] MUTE button
Press to turn the mute function on/off.
11
COLOR buttons
Choose tasks or options.(for Media Input only).
12
[NUMERIC] buttons
Enter text for network setting.
13
Format button
Press to switch screen aspect ratio.
14
[EXIT] button
Press to turn back to the previous OSD menu.
15
[INFO] button
Press to turn on/off the information OSD displayed
on the upper right corner of the screen.
16
[ ] button
Press to increase the value in OSD menu.
17
[OPTION] button
Access currently available options, picture and
sound menus (for Media Input only).
18
[+] Volume up button
Press to increase the audio output level.
19
[-] Volume down button
Press to decrease the audio output level.
20
21
[ID SET] button
If a single large- screen matrix (video wall) is
created, set ID key to control each dispaly.
ID Remote Control:
You can set the remote control ID when you want to use
this remote control on one of several different displays.
Press [
ID
] button. The red LED blinks twice.
1. Press [
ID SET
] button for more than 1 second to
enter the ID ode. The red LED lights up.
Press the [
ID SET
] button again will exit the ID
Mode. The red LED lights off.
Press the digit number [
0
] ~ [
9
] to select the display
you want to control.
For example: press [
0
] and [
1
] for display No.1,
press [
1
] and [
1
] for display No. 11.
The numbers available are from [
01
] ~[
255
].
2. Not pressing any button within 10 seconds will exit
the ID Mode.
3. If an error pressing of buttons other than the digits
occurred, wait 1 second after the red LED lights
off and then lights up again, then press the correct
digits again.
4. Press [
ID ENTER
] button to confirm. The red LED
blinks twice and then lights off.
NOTE:
•
Press [
NORMAL
] button. The green LED blinks
twice, indicating the display is in normal operation.
It is ncecssary to set up the ID number for each
display before selecting its ID number.
2.3. Remote Control
2.3.1. General functions
1
13
20
14
15
16
17
18
19
2
3
4
5
6
7
8
9
11
10
12
21
1
[POWER] button
Press to switch on the display from standby mode.
Press again to turn it off and back into standby
mode.
2
[PLAY] button
Control playback of media files (for Media Input
only).
3
[
SOURCE] button
Press to toggle Video Source Menu. Press [ ] or
[ ] button to select one of the video sources among
Displayport, DVI-D, VGA, HDMI1, HDMI2, Media
Player, Browser
or
PDF Player
. Press [
OK
] button.
4
[MENU] button
Press to turn the OSD menu on/off.
5
[ ] button
Press to mo
ve
the selection up in OSD menu.
6
[ ] button
Press to decrease the value in OSD menu.
7
[OK] button
Press to activate the setting inside the OSD menu.
