Disclaimer and Warning
Legends
1.1 Introduction
1.Product Introduction
1.
Important Note
Warning
Z40K is a 25.9MP 4K camera with 3-axis gimbal. It's powered by
Panasonic 1/2.3” COMS module, has up to 40x mixed zoom. With
advanced OIS function, Z40K can compensate the subtle
movements of the UAV to keep the camera stable even with 20 times
optical zoom. It supports visible optical zoom, photographing and
video. OSD can display zoom times, status of record and picture
mode, storage capacity of memory card, video recording time,
remaining number of photos, also can select to turn off the OSD.
When the external GPS and time input, GPS coordinate and
shooting time can be saved in image file, OSD can display real-time
as well. The 3 axis gimbal can achieve stabilization in yaw, roll and
pitch. The integrated design of damping system and gimbal can
greatly reduce mechanical vibration.
Z40K is widely used for inspection especially power and utility
industry.
Congratulations on purchasing your new Viewpro product. Please
read this entire document carefully. Failure to read or follow instruc-
tions and warnings in this document may result in damage to your
Viewpro product. Disassemble the gimbal camera by user is not
permitted, as which may cause the camera does not work normally.
Viewpro accepts no liability for damage, injury or any legal responsi-
bility incurred directly or indirectly from the use of this project. The
user shall observe safe and lawful practices including, but no limited
to, those set forth in the manual.
