3.2 Serial Port / TTL Control
17.
Switch from Position 2 to 1: Take a picture
OSD display 'REC IMG' a second.
7) Multi:
Backup channel
TTL communication requirements: TTL signal is 3.3V, baud rate:
115200, data bit 8, stop bit 1, no parity, HEX send and receive.
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Connection Diagram
(PC - USB to TTL Cable- Gimbal Camera as
example):
Switch from Position 2 to 3: Start record / repeat operation to stop
record
Start record, the OSD display rec hh:mm:ss.
Stop record, the OSD display STBY.
