4.
[1] Control box
[2] Upper damping board
[3] Lower damping board
[4] Infrared thermal camera
[6] Yaw axis motor
[7] Roll axis motor
[8] TF card slot
[9] Pitch axis motor
[10] 3-6S power interface
[11] Micro HDMI interface
[12] Ethernet interface
[13] Viewport unlock button
[5] Damping ball
2.2.1 Control Box Printing (Standard Version)
PI
TCH
Yellow Jumper Cap
TX
RX
GND
YAW
MODE
ZOOM
FO
CU
S
PIC/REC
MU
LTI
USB
AV
5V output
GND
1
2
3
Please ensure that there isn’t any obstacle while the
motor rotating.
Please remove the obstacle immediately if gimbal
camera is blocked during rotation.
Don’t put the infrared thermal camera towards the
sun in case any burn to the camera
The input voltage cannot be higher than 6S.
The pin insertion interface cannot be connected with
power supply.
The yellow jumper cap cannot be removed
