Register The Detector In The Alarm System
Switch to Connection Mode on the control panel. press the test
button of the sensor twice. The conteol pannel beeps once: the
motion detector is registered. If you hear two beeps, the detector
has already been connected.
To check if the registration is compelete, arm the system and
trigger the sensor again. If the siren rings out, the registration
is successful.
Standards
Notes
Emergency Alarm Treatments
This product bears the selective sorting symbol for waste
electrical and electronic equipment(WEEE).This means
that this product must be handled pursuant to
European.Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.For
further information,please contact your local or regional
authorities.Electronic products not included in the selective
sorting process are potentially dangerous for the
environment and human heath due to the presence of
hazardous substances.
In compliance with European law.
This product was designed and manufactured in
compliance with Directive 2002/95/EC of the European
Parliament and of the Council on the restriction of use of
certain hazardous substances in electrical and electronic
equipment (RoHS Directive - Rohs) and is deemed to
comply with the maximum concentration values set by the
European Technical Adaptation Committee(TAC).
Made in CHINA
Indications Summary