ViewEra V202 Series User Manual Download Page 3

 

EMC COMPLIANCE 

 

This device has been tested and found to comply with the standards for a class B digital device, 

pursuant to Part 15 of FCC Rules. Those standards are designed to provide reasonable protection 

against harmful interference in a residential installation. This device generates and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications.   

If this device does cause harmful interference to radio or television reception, which can be determined 

by turning the device off and on, user is encouraged to try to correct the interference by one or more of 

the following measures: 

> Reorient or relocate the receiving antenna 

> Increase the separation between the device and receiver 

> Plug the device into a wall outlet different from that connected to the receiver. 

> Consult the dealer or an experienced technician for help. 

 

CAUTION:

 any change or modification not expressly illustrated in this manual may void the warranty. 

 

NOTE:

 any unshielded cable is not allowed to be used in the device. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1   

Summary of Contents for V202 Series













Reviews: