ViewCast Niagara 4100, User Manual

Page: 56 / 160

Advanced Operations
50 ViewCast
Editing an Adaptive Adobe Flash encoder
When you create a new encoder, the Encoder Properties window appears. The Encoder Properties
windows for editing a new encoder or an existing encoder are identical. You must configure the audio
and video settings for each encoder type.
Use the Video, Audio, Output, and Security tabs to edit the settings. Begin with configuring the video
and audio settings, then the streaming properties. The streaming properties and advanced streaming
settings are different for each type of encoder.
You have two options for a publisher on the adaptive encoder:

Apple HTTP Live Streaming

Adobe Flash Dynamic Streaming
The fields on the Output tab and the Security tab are different depending on the type of publisher.
From the Adaptive Adobe Flash Encoder Properties window (Figure 61), you can set the encoder to start
streaming automatically by clicking the
Auto Start checkbox. You can also start the encoder from this
window by clicking the Start Flash Encoder link in the top right corner of the window.
Click Encoders

All Encoders from the home page. Then select the Edit link next to the Adaptive Adobe
Flash encoder whose properties you wish to modify. The system displays the Encoder Properties window
for the selected encoder.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Submit .
Otherwise, all your changes will be lost.
Figure 61. Adaptive Adobe Flash Encoder Properties