ViewCast Niagara 4100, User Manual

Page: 40 / 160

Basic Operations
34 ViewCast
Stopping an encoder
To stop an encoder:
1. Press Menu . The system menu appears.
2. Press Enter . The encoder screen appears.
3. Use the Up and Down arrow buttons to highlight the encoder you wish to stop.
4. Press Stop . The encoder screen appears (Figure 30) showing the status of each encoder.
Figure 30. Encoder screen
5. Use the Up and Down arrow buttons to select the encoder you want to terminate.
6. Press Stop . The stopping screen appears (Figure 31).
Figure 31. Stopping screen
7. Press Menu . The system menu appears.