background image

BR - 11

PROGRAMMABLE OPTIONALS

-    

TA SEEK, TA ALARM

To determine what action will the radio take if the newly tuned station does not receive TP information 
for 5 seconds.

TA SEEK     
The radio retunes to a different station which contains TP information.
TA ALARM

The radio does not retune but beeps will come out.

-    PI SOUND, PI MUTE

When the vehicle is crossing the area where two stations with same AF but different PI code can be 
received at the same time, the receiver will become unstable, under this situation two modes can be 
selected.
PI SOUND
The different PI sounds will be heard.
PI MUTE 
Under the same situation, the radio will be muted.

-    RETUNE L, RETUNE S

To determine the initial time of automatic TA Search or PI Search.
RETUNE L  90 seconds
RETUNE S  30 seconds

To use this function keep press long 

AUDIO MENU

 Button for few seconds, each time you press this 

button the mode will move and the functions will shown on the display, turn the 

encoder volume 

knob up/ down

 to set the desires functions ,the function states as following:

-    MASK PI, MASK ALL 

“PI” is referred to “Different PI with same AF”.
During AF search, PI stations and non-RDS stations with strong signal will be masked, in the latter 
case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the 
misjudgment of the radio under interference.
There are two options to handle this situation.
MASK  PI  to mask only the AF with different PI.
MASK ALL  mask both PI and strong signal non-RDS stations.

Summary of Contents for VTC1000R























Reviews: