Basic operation
DIGITAL CARD
Play operation
and USB
Digital cards (MMC/SD/MS card) and USB with mp3&pictures
(.jpg) may be played and displayed through the unit.
MMC/SD/MS cards may be directly input through the card reader
slot.The USB socket can be used to supply signals to the unit from
usb sources.
How to select digital USB/CARD to play
1. Turn the unit on.
2. Insert either A usb source or a card into the appropriate usb
connection point on the master left or the MMC/SD card reader
on the master top.
3. Press the DVD/CARD/USB button on the remote the units
would auto detect the USB/CARD socket
4. If USB/CARD is selected, the unit will begin to read the card
or USB connected to it .
" "
USB
11
SETUP Menu Setting
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to
the next level submenu or confirm your
selection.
3.Press to enter the submenu or returen to the previous menu
4.Press to highlight the desired menu.
To exit from the menu
Press SETUP The settings will be stored in the player's memory
even if the player is switched off.
The options included in General Setup page are:" TV Display","Angle
Mark","OSD lang","Captions","Screen Saver".
Follow the steps below:
enter
General Setup Page
1.Press SETUP to enter the setup menu.
2.Press to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have
connected.
General Operation&General Setup Page
- - GENERAL SETUP PAGE - -
GOTO GENERAL SETUP PAGE
TV DISPLAY Wide
ANGLE MARK ON
OSD LANGUAGE ENG
CLOSED CAPTIONS ON
SCREEN SAVER ON
Dolby
