VIETA VH-IS250BK, User Manual

Page: 17 / 34

17 ENGLISH
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the apparatus is
connected properly.
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button, first select
the correct source.
- Reduce the distance between the remote control
and the unit.
Specifications
General
Power Requirements AC 110-240V ~ 50/60Hz
Power Consumption 15W
Output Power 25W x 2
Total Harmonic Distortion 1% (1kHz, 1W)
Audio Input Sensitivity/Impedance 500mV/47kΩ
Frequency Response 20Hz - 20kHz
Unit Dimensions (W x H x D) 480 x 169 x 107mm
Speaker
Impedance 8Ω
Rate Power 25W
Remote
Distance 6m
Angle 30º
Standard Accessories
Remote Control x 1
Owner’s manual x 1

Design and specifications are subject to change without notice.
- Insert the battery with its polarities (+/-) aligned as
indicated.
- Replace the battery.
- Aim the remote control directly at the ensor on the
front of the unit.
Using iPhone to play music
- While the iPhone is playing the music throught the
docking, there may be a chance that the iPhone
may not be under a good receiption mode to get the
incoming call signal.
No Response From the Unit
- Disconnect and reconnect the AC power plug, then
turn on the unit again.