VIETA VH-BS450BT, User Manual

Page: 9 / 14

17 ENGLISH
Bluetooth NFC 2.1 Speaker
16
Symbols in these Instructions for Use
Important Safety instructions
When used in the directed manner, this unit has been
designed and manufactured to ensure your personal
safety. However, improper use can result in potential
electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation
and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in
these instructions and on the unit.
1. Water and Moisture
The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a set basement.
2. Ventilation
The unit should be situated so that its location or
position does not interfere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or
similar surface that may block the ventilation openings.
Also, it should not be placed in a built-in installation,
such as a bookcase or cabinet, which may impede the
flow of air through the ventilation openings.
3. Heat
The unit should be situated away from heat sources
such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
4. Power Source
The unit should be connected to a power supply only
of the type described in the operating instructions or as
marked on the appliance.
5. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them. It is always best to have a clear
area from where the cord exits the unit to where it is
plugged into an AC outlet.
6. Cleaning
Clean only with dry cloth - The appliance should be
cleaned only as recommended by the manufacturer.
7. Object and Liquid Entry
Care should be taken so that objects do not fall and
liquids are not spilled into any openings or vents located
on the product.
8. Attachments
Do not use attachments not recommended by the
product manufacturer.
Warning:
Warms of dangers for your health and indicates potential risks of injury.
Caution:
Indicates potential dangers for the device or other objects.
The lightning symbol warns the user of
dangerously high voltages inside the case.
The exclamation mark symbol points to
important instruction or maintenance
remarks in the accompanying guidelines.
9. Lightning and Power Surge Protection
Unplug the unit from the wall outlet. This will prevent
damage to the product due to lightning and power-line
surges.
10. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of
fire of electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service
personnel when;
A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into
the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure
damaged.
E. The unit exhibits a marked change in performance or
does not operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of
time, such as a month or longer, the power cord should
be unplugged from the unit to prevent damage or
corrosion.
13. Servicing
The user should not attempt to service the unit beyond
those methods described in the user’s operating
instructions. Service methods not covered in the
operating instructions should be referred to qualified
service personnel.
Note:
Highlights tips and information for you.
Warning:
- Please refer the information on exterior bottom
enclosure for electrical and safety information before
installing or operating the apparatus.
- To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The apparatus
shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be
placed on the apparatus.
- The mains plug is used as disconnect device, the
disconnect device shall remain readily operable.
These symbols may be found on the device
and shall indicate the following: