Viesta VDI90230EG, Instruction Manual, Page: 10 / 82

[ EN
● 10 ]
Version: 2:0
KEN002DH 22.08.2019
4.3 Press (Increase) button again when it is working on the mid speed, the cooker hood works at
the high speed and the LED display will display “3”.
5. ( Decrease) button
Press (Decrease) button, the cooker hood will decrease one speed, and the display will show the
current working speed. When press (Decrease) button again when it is working on the low speed,
the cooker hood will turn off and the backlight of the (Decrease) button will be off.
6. (Timer) button:
6.1 The (Timer) button works when the motor and light is on only. The timer setting is 5mins and
could be repeat setting. When the time is up, the cooker hood will be turn off and the light will be off
.
TROUBLESHOOTING
Fault Possible Cause Solution
Light on, but motor does not work
Fan switch turned off. Select a fan switch position.
Fan switch failed. Contact service center.
Motor failed. Contact service center.
Light does not work, motor does not
work
House fuses blown. Reset/Replace fuses.
Power cord loose or disconnected. Refit cord to power outlet.
Switch power outlet on.
Oil leakage
One way valve and the outlet are not
tightly sealed.
Take down the one way valve and seal
with sealant.
Leakage from the connection of
chimney and cover.
Take chimney down and seal.
Lights not working Broken/Faulty globes Replace globes as per this instuction
Insufficient suction The distance between the cooker
hood and the gas top is too far
Refit the cooker hood to the correct
distance.
The Cooker hood inclines The fixing screw not tight enough Tighten the hanging screw and make
it horizontal.
NOTE:
Any electrical repairs to this appliance must conform to your local, state and federal laws.Please contact
the service centre if in any doubt before undertaking any of the above.Always disconnect the unit from
the power source when opening the unit.