Viessmann VITOWELL EASY D1, Operation Manual

Page: 5 / 20

260 mm
137 mm
Rubber
Washer
Rubber
Washer
Screw A
*
* *
Heater Unit Installation
Select a suitable position in the
bathroom.
Remove the Screw A at the bottom
of the unit.
Remove the Front Cover from the
bottom and then lift up the Front Cover.
Mark 3 Screw points of the Heater
Base on the wall. (Refer * marking)
The Instant Water Heater position
should be1.5m above the bathroom
floor.
Mark 2 screw points of the Slider
Rail beside the heater. It is recom-
mended that the top of the portion is in
level with the top of Instant Water
Heater.
Use 6mm diameter drill and make
the wall plug holes in depth of 34mm.
Insert the wall plugs and mount the
Instant Water Heater firmly in position
with the screws provided.
Insert the Shower Holder and Soap
Tray into the Slider Rail.
Mount the Slider Rail to the Rail
Bracket.
Remove the cap from the Rail
Bracket and screw the Bracket to
marked position. Replace the cap.