13
5. +/- for the required temperature
6. Press
"OK"
to confirm
Operating program
Further information can be found in chapter
"Terminology" in the appendix.
Setting the operating program
Default display
1.
"Menu"
2.
"Heating"
3. Select the required heating circuit.
4.
"Op mode"
Op mode heating zone, roof space
Heating mode
Economy mode
Party mode
Fig.9
5. Select the required operating program:
■
è
for heating mode
■
â
for economy mode
■
Þ
for party mode
An operating program with a bright background is
already enabled.
Note
and will only be shown when heating is ON.
Note
Tapping
è
again shuts down heating mode.
Time program
Further information can be found in chapter
"Terminology" in the appendix.
Setting a time program
The time when the heating circuit delivers central heat-
ing with standard or reduced room temperature is
dependent on the settings of the switching times for
the relevant day (4 possible time phases).
■
If one or more time phases are selected, central
heating with standard room temperature will be
active for those times.
■
If no time phases are selected, central heating will be
enabled for the whole day with reduced room tem-
perature.
Central heating
Setting central heating temperatures
(cont.)
5677 786 GB
Summary of Contents for Vitotrol 350
Page 43: ...43 5677 786 GB...
