background image

9

When there is a message, the associated message
symbol flashes on the display.

OK

 to display the message text with message code.

Explanation of messages

Display

Meaning

Fault " "

The system is no longer in standard mode; the fault must be corrected 

as

quickly as possible

.

The central fault message terminal is activated.

Message via communication facility (e.g. Vitocom) possible.

Warning " "

Operation of the appliance is restricted and the cause of the warning must be
removed.

Note "

"

The appliance is functional but the information must be noted.

Calling up messages

Call up the reason for the message with 

OK

.

Fault

Acknowledge with

OK

Fault

18

Fig. 3

Some messages are displayed as plain text.

Explanation of the message codes

Service instructions for the Vitotronic 200,
type WO1C

Acknowledging messages

Follow the instructions on the display.

Note

The message is transferred to the menu.
If an acknowledged fault is not remedied, the fault
message is redisplayed the following day and the
alarm is switched on.

Menu

Party mode

HC1

Fault

Heating/cooling

Economy mode

ã

OK

Continue with

Fig. 4

Calling up acknowledged messages

Extended menu

1. 

2.  "Fault"

"Warning"

 or 

"Note"

Message displays

Message displays

5465 1

15 GB

Diagnosis

 

Summary of Contents for Vitotrol 300-B

















Reviews: