34
6137925
GB
Advanced settings
Call up the menu points
"Settings"
->
"Advanced settings"
.
Caution
!
Incorrect settings can damage your floor or your heating system.
We recommend that advanced settings are used only by qualified
contractors. Consult your dealer, or use the advances settings
with extreme caution.
"Heating system"
Changes from heating to cooling
"NTC sensor"
Changes the type of NTC sensor
(see installation instructions)
"Hysteresis"
Matching of the switching hysteresis
"Calibration"
Adjustment of displayed actual temperature
"Pilot wire"
Changes the setback contact settings
"Adaptivity"
See the description below
"Information"
General software information
"Factory reset"
Resets all settings
Adaptivity
The thermostat automatically starts/stops in advance to reach the
required temperature at the required time.
The learning period may take up to 2 weeks.
If Adaptivity is deactivated, the thermostat only starts/stops at the set
time.