64
5797 340 - 01
Vitoflex 300-RF Installation & Operating
Managing the parameter sets
Parameter sets allow you to save parameters specific
to a particular fuel and load them again at a later date.
Tap the following on-screen buttons:
1. “Menu”
2. “Special functions”
3. “Parameter set management”
The “Parameter set management” window opens.
Parameter Set Management
Legend
A
Entry field for parameter name
Here, the name of a new parameter set can be
specified. The names of existing parameter sets
cannot be changed.
B
Parameter selection field
Tap to select a parameter set.
The selected parameter set is highlighted against
a grey background.
C
“Save”
Saves the currently set parameters to the selected
parameter
set.
D
“Load”
Loads the selected parameter set.
E
“Create”
Creates a new parameter set.
F
“Delete”
Deletes the selected parameter set.
F
“Load factory settings”
Resets the controller to its factory settings.
Saving/importing parameter sets
Parameter sets can be saved or imported, provided an
external data carrier has been connected to the USB
connection of the programming unit.
1. Connect a data carrier to the USB connection.
The “Copy parameter set” screen is displayed on
the programming unit.
2. Mark a parameter set in a list by tapping on it.
The selected parameter set is highlighted against a
grey
background.
3. Tap on the “Copy” button.
The selected parameter set is copied. The parameter
set will then also appear in the other list respectively.
Legend
A
Control list
Parameter sets saved in the controller.
B
External list
Parameter sets saved on an external data carrier.
C
“Copy”
The marked parameter set is copied.
“Copy parameter set” screen
Further Settings