Initial start−up, inspection and maintenance
6
Implementation
(cont.)
2.Setting the rated output
M
aint.
I
nitial start−up
Check the type of gas with your local gas supplier.
The burner is factory−set to natural gas E.
Adjust the nozzle pressure for operation with natural gas LL according to
table22.
Record the type of gas in the commissioning/service report (you will find this
report on pages36 and37).
Idle pressure
1.
Close the gas shut−off valve.
2.
Loosen the screw in the test
nipple
A
but do not remove.
3.
Connect the U−shaped pressure
gauge.
4.
Open the gas shut−off valve.
5.
Measure the static pressure
(max. 50mbar).
6.
Record the actual value in the
service report.
You will find the commissioning/
service report on pages36 and37.
5692449 GB
Gas train (make: Kromschröder)
Gas train (make: Dungs)
Summary of Contents for VITOFLAME 200
Page 30: ......
