22
Connecting the programming unit to the control unit
Open the control unit; to do so undo the control unit
panels.
X2
X10
X15
Fig. 24
The ribbon cable is routed over 2 retainers.
For connection, see connection and wiring diagram on
page 41.
Connecting the internal connecting cables to the control unit
Route the cables into the control unit. Provide strain
relief for cables that do not have any; see Fig. 25.
Insert cables with moulded strain relief into the casing
recess; see Fig. 26.
Applying strain relief
1.
2.
4.
3.
Fig. 25
Strip max. 100 mm of insulation from the
cables.
Installing the control unit
(cont.)
5839818
