Set-up and Connections
13
120 USG / 450 ltr Tank Installation
(continued)
Temperature sensor installation (when using a Vitotronic 200 / 300 or Vitodens 200)
The primary DHW tank temperature sensor is included in the boiler control unit package.
1.
Remove sensor mounting hardware
from sensor well.
2.
Position the temperature sensor on
the outside of the location spring (not
in the groove), so that it is flush with
the front of the spring.
3.
Attach sensor cable to clip.
Never wrap insulating tape around the
sensor.
4.
Insert the sensor mounting hardware
with the sensor until it bottoms out
inside the lower sensor well.
Note:
When using a Vitotronic 100 boiler
control, refer to page 14 for aquastat
installation.
Checking anode connection and fitting lid
1.
Ensure the grounding wire
is
properly secured to magnesium
anode
.
Magnesium anode
Grounding wire cable
5285
658
v2
.1
2.
3.
4.
1.
Fig. 13
IMPORTANT
1.
1.
2.
B
A
Fig. 14
Summary of Contents for Vitocell-B 100 CVB Series
Page 22: ...22 5285 658 v2 1 ...
Page 23: ...23 5285 658 v2 1 ...