Viessmann Vitocal 350-A AWHI 351.A14, Installation And Service Instructions Manual

Page: 76 / 140

76
Pump/component Parameter Setting
Heating circuit pump and mixer M3
(controlled via mixer extension kit) "System definition"
Ó
"System scheme 7000"
With heating circuit with mixer
M3
Note
Set rotary switch S1 in the ex-
tension kit to "2" (see "Mixer
extension kit" installation in-
structions).
Circulation pump for cylinder heating "System definition"
Ó
"System scheme 7000"
With DHW heating
"Internal hydraulics"
Ó
"Enable 3-
way diverter valve heating/DHW
730D"
"0"
DHW heating
with cylinder loading system:
■
Cylinder loading pump
■
2-way shut-off valve
"System definition"
Ó
"System scheme 7000"
With DHW heating
"External heat source"
Ó
"Enable external heat source for
DHW heating 7B0D"
"1"
DHW circulation pump Extended menu:
"Time prog. DHW circ."
Setting a time program
Solar thermal system "Solar"
Ó
"Type solar control unit 7A00"
■
"1" (with Vitosolic 100)
■
"2" (with Vitosolic 200)
Circulation pump for DHW reheating "External heat source"
Ó
"Enable external heat source 7B00"
"1"
"External heat source"
Ó
"Enable external heat source for
DHW heating 7B0D"
"1"
Remote control (e.g. Vitotrol 200-A) "Heating circuit 1"
Ó
"Remote control 2003"
or
"Heating circuit 2"
Ó
"Remote control 3003"
or
"Heating circuit 3"
Ó
"Remote control 4003"
"1"
Note
Set code on the Vitotrol 200-
A to assign heating circuits:
H1 for heating circuit A1
H2 For heating circuit M2
H3 For heating circuit M3
(see "Vitotrol 200-A" installa-
tion instructions)
Vitocom 100 "System definition"
Ó
"Vitocom 100 7017"
"1"
External H1 extension "System definition"
Ó
"External extension 7010"
"1"
Note
For parameters for external
functions, see the following
table.
Commissioning, inspection, maintenance
Commissioning the system
(cont.)
5692878