21
With frost protection monitoring
Set the holiday program for the required time; see
page 13.
If the DHW temperature falls below 5 °C, the frost pro-
tection function is enabled.
No frost protection monitoring
Disconnect the power plug.
!
Please note
If outside temperatures of below -5 °C are
expected, take appropriate measures to protect
the DHW heat pump from frost.
If necessary, contact your contractor.
Notes on taking the appliance out of use
When restarting, you may have to reset the date and
time (see page 18).
Switching on the DHW heat pump
After being taken out of use or a power failure lasting longer than 24 hours
1.
Check that the power plug is plugged in. Switch on
the power supply, e.g. at a separate fuse or a
mains isolator.
After a few seconds, the appliance starts in the
"ECO"
operating program.
"--:--"
flashes.
2.
Note
If the time and day are displayed alternately, see
page 18.
Press any button.
The appliance is ready for operation. The set DHW
temperature for DHW heating is 53 °C.
From the "OUT"
operating program (standby mode, holiday program)
Use
to select the required operating program.
Switching on and off
Switching off the DHW heat pump
5593131
Summary of Contents for T0E 060-A
Page 5: ...5 10 Keyword index 25 Index Index cont 5593131 ...
Page 26: ...26 5593131 ...
Page 27: ...27 5593131 ...