5
6.
5.
4.
7.
2.
1.
4x
3.
Ø 10
4x
R1/2
Fig. 2
1.
Align the drilling template below the fitting assem-
bly of the pre-plumbing jig.
2.
Drill holes
7
10 mm and insert rawl plugs.
3.
Fit the clips to the sub-mounting kit.
4.
Secure the sub-mounting kit to the wall with the
screws and washers supplied.
5.
Secure the mounting plate to the fitting assembly
using screws M 4 x 10 (self-tapping).
6.
Secure the gas pipe with clip to the mounting plate.
7.
Seal the on-site gas shut-off valve to the gas pipe.
Fitting the sub-mounting kit
5785 284 GB
Summary of Contents for Sub Mounting Kit
Page 15: ...15 5785 284 GB ...
