40
■ The cylinder temperature sensor is
supplied in the control unit pack.
■ Position the sensor on the
outside
of
the sensor retainer contact spring (not
in the groove) so that it is flush with the
front of the spring.
■
Never
wrap insulating tape around the
sensor.
■ Insert the sensor retainer with sensor
into the sensor well as far as possible.
A
4.
1.
2.
3.
5.
A
Sensor well for cylinder temperature
sensor
Installation sequence
Installing the cylinder temperature sensor
5517 155 GB
Summary of Contents for SEIA
