6
1.
Select suitable hole spacings depending on the
product type, as shown on the following pages.
Fig. 3
2.
Secure the eccentric discs in place using suitable
rawl plugs and screws.
Danger
Using unsuitable fixing materials may cause
the appliance to fall off the wall suddenly.
Only use screws and rawl plugs that are
suitable for the type of wall (masonry, con-
crete, plasterboard, etc.).
Fig. 4
3.
Align the eccentric discs horizontally and tighten
the screws.
Fig. 5
4.
Secure the self-adhesive cable clip to the bottom of
the metal frame at the rear of the appliance.
Note
The position of the cable clip should be appropriate
for the power supply.
Fig. 6
5.
Connect the appliance. See "Electrical connec-
tion".
Mounting the appliance on the wall
5855607
Summary of Contents for EI2.A1000GW
Page 11: ...11 5855607 ...
