Solar-Divicon DN25B Installation, Start-up, Service
16
5 Cleaning
Risk of burns!
The valves, fittings and the pump
may heat up to more than 212 °F
(100 °C) during operation.
The shell must remain closed
when cleaning.
Clean the solar station only from the outside with a damp cloth. Never use scouring or sand-containing cleaning agents.
6
Maintenance and decommissioning [specialist]
Before maintaining and decommissioning the product, you must read and observe the following safety instructions:
Risk of electric shock!
Disconnect all electrical devices in
the heating circuit from the power
supply before carrying out
maintenance work or
decommissioning!
Secure the electrical devices
against being switched on again.
Risk of burns and scalding!
The valves and fittings may heat up
to more than 212 °F (100 °C).
During maintenance or
decommissioning, the solar fluid
may escape as vapor and result in
scalding!
Flush and fill the system only if the
collector temperatures are below
122 °F (50 °C).
Wait until the solar fluid has cooled
down to 122 °F (50 °C).