Viessmann Booster Eco 4 5301 Manual Download Page 14

14

7. Gewährleistung 

Jedes Produkt wird vor seiner Auslieferung auf 

vollständige Funktion überprüft. Der Gewährlei-

stungszeitraum beträgt 2 Jahre ab Kaufdatum. 

Tritt in dieser Zeit ein Fehler auf, setzen Sie sich 

bitte direkt mit der Firma 

Viessmann

 Modellspiel-

waren in Verbindung. Wird nach Überprüfung des 

Modells ein Herstell- oder Materialfehler festge-

stellt, wird das Produkt kostenlos instandgesetzt.
Von der Gewährleistung ausgeschlossen sind Be-

schädigungen des Modells, die durch unsach-

gemäße Behandlung, Nichtbeachten der Bedie-

nungsanleitung, nicht bestimmungsgemäßen Ge-

brauch, Überlastung, unzulässig hoher Umschal-

timpuls von analogen  Wechselstromanlagen, feh-

lerhafte Verdrahtung der Modellbahnanlage, ei-

genmächtigen Eingriff, bauliche Veränderungen, 

Gewalteinwirkung, Überhitzung u. ä. verursacht 

werden.
Jede Haftung für Schäden und Folgeschäden 

durch nicht bestimmungsgemäßen Gebrauch, 

Nichtbeachtung der Bedienungsanleitung, eigen-

mächtigen Eingriff, bauliche Veränderungen, Ge-

walteinwirkung, Überhitzung, Überlastung, Feuch-

tigkeitseinwirkung u. ä. ist ausgeschlossen.

Wenn Sie die Fehlerursache nicht finden können, 

senden Sie das Modell zur Reparatur bitte direkt 

an den 

Viessmann

-Service (Adresse siehe unten).

7. Warranty

 

Each product undergoes a full function test prior 

to delivery. The warranty period is two years from 

date of purchase. Should there be a fault during 

this period, please contact 

Viessmann

 Modell-

spielwaren directly. If we find a manufacturing or 

material fault after checking the product, then we 

will repair the product free of charge.
From the warranty excluded are damaged prod-

ucts due to inappropriate handling or use, ignor-

ing the user manual, overload, not permitted high 

switching pulses in analogue AC layouts, faulty 

wiring of the model train layout, unauthorised 

changes to the product, effects caused by undue 

force, overheating and similar causes.
If you cannot establish the cause of the fault, send 

this model for repair directly to the 

Viessmann

 

Service (address see below).

Summary of Contents for Booster Eco 4 5301

















Reviews: