manualshive.com logo in svg

Viessmann BM-123/177, Overview

Share
Download
Viessmann BM-123/177 Overview Download Page 32

Subject to changes due to technical improvements  

ESS Energie Systeme & Service GmbH

32 

CHP accessory range  – 01/2010

   

5368 463 

  

 Electronics

6

Optional versions

 

•   OPTION MMM Additional auxiliary drive

and functions

  

    Fuse outlet 230 V / 16 A (e.g. for boiler) incl. installation  

Please note: a separate control panel extension is required for this option!

 

•   OPTION MMM Additional auxiliary drive

 

    Pump control up to 4 kW 

Please note:

 a separate control panel extension is required for this option!

 

•   OPTION MMM Databus connection LON BUS  

alternative

   OPTION MMM Databus connection ProfiBus DP slave  

alternative 

   OPTION MMM Databus connection CANopen BUS   

alternative 

    OPTION MMM Databus connection MODBUS BUS 

  

Computer connection in each case according to requirements on site

 

•   OPTION MMM Remote monitoring / actual data capture with Telecontrol "Exclusive"

    Remote monitoring and actual data capture takes place via an external appliance, the so-called 

Telecontrol. The Telecontrol is connected to the MMM via a serial interface. Using the associated 

visualisation software, it is possible to dial into the system remotely via the telephone network. 

The Telecontrol is available in four different version (see separate Telecontrol Specification). To 

connect the Telecontrol to the MMM, the "Exclusive" version is required. 

The following functions are implemented in the "Exclusive" Telecontrol version:

 

   -   Sending messages if there is a fault (SMS, fax, email)

 

   -   These messages can be programmed to be allocated to certain people. For example, CHP faults can 

be sent to different people than general boiler or system faults.

 

   -   Data recording of all CHP values and up to 16 analogue values from the MMM. 

The data is depicted on freely configurable graphs.

 

   -  Long-term fault message history

 

   -  Long-term operating message history

 

   -  Establishing user profiles to save individual settings

 

   -   Once a user has registered with the Telecontrol and set up a graph according to their individual 

criteria, the same graph can be viewed again on another PC without having to reconfigure it.

 

  

Please note:

 a separate control panel extension is required for this option!

Delivery

 

As loose accessories for on-site installation 

Summary of Contents for BM-123/177









































Reviews:

No comments

Brands by name

Popular brands

Load more brands