Setup procedure for the Principal Grand
subwoofer
1.
In order to prevent scratches and finger-prints we
have supplied with each Principal Grand a pair of our
special cloth gloves. We highly recommend using
these throughout the entire setup process.
2.
Connect the Principal Grand subwoofer using either
a pair of speaker connections, a pair of Phono (RCA)
cables for stereo or a single LFE cable subwoofer
cable. In each case we recommend that you discuss
the best connection scheme with your retailer and
purchase the appropriate cable choice.
3.
Connect the Principal Grand to the AC power
outlet.
4.
Turn on the Master Power Switch.
Note:
If the power LED does not immediately
illuminate, please check that the On/Auto switch is in
the Auto position. If this is the case, it will be
necessary for the subwoofer to receive and audio
signal before the LED will illuminate. For the setup
procedure you may want to place this switch in the
On-Position and then return it to the Auto-Position for
normal operation.
5.
For the ideal final setup as well as the most
efficient use of setup time, please follow these simple
dial-in instructions.
Summary of Contents for Principal Grand
Page 6: ......
