25
Instruction for use Multiplex
B
Components
Overflow fitting
Profile seal
Seal
d
Seal
e
Flange cover
f
Fastening flange
g
Fastening screw
h
Rotatable collar
i
Protective foil
j
Valve cone
k
Fastening screw
l
Valve top
m
Profile seal
n
Wedge seal
o
Sliding ring
p
Union nut
q
Drainage elbow
r
Odour trap
s
Wedge seal
t
Sliding ring
u
Union nut
u
Bowden wire
u
Overflow pipe
u
Sleeve
21
22
23
24
C
Dimensions
Model
L
H
6171.10
100 - 260
180 - 400
6171.11
130 - 370
180 - 430
6171.12
100 - 680
180 - 480
Assembly
Mount seal.
In the case of steel
bathtubs (max. 3 mm)
also mount the narrow
seal
Place the flange and the
flange cover together
d
Mount the seal onto the
flange.
e
Insert the flange into the
overflow fitting.
f
Screw in the fastening
screws and tighten per
hand.
g
Mount the red protective
cover onto the flange
cover.
h
Push the rubber sleeve
onto the overflow pipe
until the lower edge is
flush with the edge of
the overflow pipe.
i
Place the double seal
onto the drain in such
a way that the gap is
positioned over the
connecting pipe.
Pull the edge of the
double seal over the
edge of the drain.
j
Insert the valve top and
the fastening screw and
tighten using the tool
supplied. The cross-
shaped structure of the
odour trap and the valve
top must be positioned
on top of each other.
k
560 mm, 725 mm:
Mount overflow pipe.
If necessary, shorten.
The overflow pipe must
be inserted at least 1.5
cm into the odour trap.
l
1070 mm:
Mount overflow pipes.
If necessary, shorten.
The overflow pipe must
be inserted at least 1.5
cm into the odour trap.
D
GB
573016_Multiplex.indd 25
20.10.14 16:10
