Viega MegaPress XL PressBooster 4896.2XL, Instruction Manual

Page: 13 / 16

MegaPress XL PressBooster - Instruction Manual
US
13
3.5.2 Inspection and maintenance
Have your machine serviced on schedule to ensure safety and availability. The maintenance
interval is 20,000 presses or 2 years, whichever occurs first.
3.6 Troubleshooting
Malfunction Cause Solution
The hinged adapter jaw is
stiff The hinged adapter jaw is
dirty Clean the hinged adapter
jaw, see “Cleaning” on page
12
You cannot open the hinged
adapter jaw of the
PressBooster wide enough to
attach it to the press ring The PressBooster did not
reset to the starting position Carry out the release cycle
press
Machine will not initiate press
after starting the cycle PressBooster is defective Send your PressBooster to
your local service point
The PressBooster requires
more than 3 cycles to
complete a full press The PressBooster is dirty or
not lubricated enough Clean and lubricate the
PressBooster, see “Cleaning”
on page 12
The press tool is defective or
incompatible Check compatibility with the
Booster and use a different
press machine
The PressBooster fails to
retract fully after a third cycle The PressBooster is in need
of servicing Use the manual release to
loosen the jaws and send
your PressBooster to your
local service point
The PressBooster fails to
retract fully after a 3rd cycle
and will not release manually PressBooster is defective Contact your local Viega or
Ridgid representative