Viega 6142.33 Instructions For Use Manual Download Page 16 | Manualshive

Page: 16 / 16

Viega 6142.33 Instructions For Use Manual Download Page 16

Turn rotatable rosette to the right.

ð

The drain opens itself.

INFO! The valve cone lifts and the water can flow away.

The cover plate does not alter its position.

3.4

Maintenance

NOTICE!

Risk of damage due to unsuitable cleaning agent.
The following cleaning agents can damage chrome-plated
surfaces and therefore may not be used:

– scouring agent
– abrasive sponges
– lime, plaster or cement dissolver
– solvents or other acidic cleaning agents

Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale on the rotatable rosette and valve cone. Under
no circumstances should scouring agent or scratching objects be used.

Strong stains, even around the drain unit and the siphon, can be
removed using typical household cleaner. It should be noted that the
cleaning agent should be rinsed off after the prescribed soaking time.
There should be no residue on the components.

3.5

Disposal

Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.

Handling

Rotaplex Drain/Overflow Functional Unit

16 from 16

«
...
14
15
16

Summary of Contents for 6142.33

















Reviews:

No comments