Remove protective plug.
Remove sliding ring and sealing from the protective plug.
Push the union nut, sliding ring and sealing onto the inlet pipe.
Push inlet pipe at least 1.5 cm deep into the drain inlet.
Screw the inlet pipe with the coupling onto the drain inlet.
Position the drain at the desired height at the place of use. If neces‐
sary, raise or lower in the existing floor using suitable material.
Align drain horizontally using a spirit level.
Secure the drain in such a way that it cannot shift when the subse‐
quent works are applied.
Work the drain into the screed or floor covering.
Mounting the drain
Handling
Advantix bathroom drain
12 from 15
