Viega 4898.5XL, Instructions For Use Manual

Page: 7 / 16

Handling
7
US
2.2.2 Technical Data
The product has the following technical data (approximate values):
Item Value
Drive [external] See “Appropriate system press tool”
under Section 2.1 on page 5
Operating temperature Based on the press tool used
Dimensions [L x W x H] Approximately 10 x 8 x 2 inch
Weight of Viega Z3 actuator Approximately 13 lbs.
Weight of 2½ inch / 73 mm press ring Approximately 6 lbs.
Weight of 3 inch / 88.9 mm press ring Approximately 7 lbs.
Weight of 4 inch / 114.3 mm press ring Approximately 10 lbs.
3 Handling
Warning and Mandatory Signs
Note the warning and mandatory signs on the Viega Z3 actuator:
General warning sign
Comply with all instructions marked with this symbol to avoid
injuries or danger to life.
3.1 Transport and Storage
Protect the Viega Z3 actuator from the following external influences:
■ Shocks
■ Wetness and moisture
■ Dust and dirt
■ Frost and extreme heat
■ Chemical solutions and vapors
Clean the Viega Z3 actuator and the press rings if there will be long idle times or
for storage. See Section 3.6.1 “Cleaning” on page 13.
Store the Viega Z3 actuator and press rings only in the original case.