INFO!
The figures show the typical use of a press jaw. Use the
hinged adapter jaws in the same way.
▶
Slide the retaining bolt in as far as it will go.
▶
Press the On/Off button.
▷
The green LED is lit. The press machine is ready for operation.
3.3
Carrying out the pressing process
CAUTION!
Risk of crushing due to improper use!
n
Do not start the press machine without a press jaw
inserted.
n
Do not reach into the area of the moving roller head or
press jaws during pressing.
n
In order to operate it safely, firmly hold the press
machine on both the handle and on the press machine
head.
NOTICE!
Risk of property damage due to damaged
press jaws!
Using a damaged, incorrectly dimensioned, or worn press
jaw may result in an incorrect pressing.
n
Check the press jaw before use for any visible defect,
and if applicable replace the press jaw.
n
Only use press jaws that are the right dimension and
are compatible with the press connector system.
Handling
Press machinePressgun 5
16
