I. OPERATING YOUR CERAMIC HEATER
**Before operating your heater, ensure that there is a safe
area between the heater and any other objects (furnitures,
curtains.etc.) Leave at least 50cm (20in) of empty space
around the top and sides, and 120cm (50in) around the
front.
To switch on your heater :
1. Turn the right hand-side knob clockwise to the desired
heat setting ( fan, I or II).
This knob allows you to adjust the power of the heat.
“Fan” : Cool air
“I” : Low heat at 750W
“II” : High heat at 1500W
2. Turn the left hand-side knob clockwise to adjust the
thermostat.
To switch off your heater :
1. Turn the right hand-side knob counter-clockwise to “
0
”.
4
II. RESETTING AFTER AUTOMATIC SHUT OFF
III. CLEANING YOUR CERMAMIC HEATER
The VA-708B has a built-in safety device which will
automatically switch the heater off in case of overheating.
To reset the appliance:
1. Turn the heater off .
2. Carefully unplug the heater and wait 5-10 minutes for
the unit to cool down.
3. After the unit has cooled down, plug it back in and
follow the operating instructions.
• Ensure that the unit is turned off and unplugged
before cleaning.
• Ensure that the heater has completely cooled down
before cleaning.
• Clean the body of the heater with a damp cloth. DO
NOT ALLOW WATER INTO THE APPLIANCE
• Clean the air inlets and outlets regularly with a vacu-
um cleaner to avoid overheating.
• DO NOT IMMERSE IN WATER OR ANY LIQUID.
• Do not use soap or chemicals which may damage the
housing of the heater.
• Allow suffi
cient drying time before operating again.
• We recommended re-packing your unit in its original
packaging , and storing in a cool dry place when not
in use.
5
