1.Parts and Functions
2.Monitor Mounting
145~160 cm
LCD Screen
Microphone
Talk/Mon Button
Menu Button
Up Button
Close Button
Return Button
Down Button
Mute Button/Indicator
Unlock Button
Connection Port
Mounting Hook
1
2
sw+
sw-
RING
GND
NC
3
ON
L1
L2
DIP
4
5
6
SW+,SW-:
Door bell call button
connection port.
Ring,GND:
Extra buzzer connection
port.
NC:
Reserved.
L1,L2:
Bus terminal.
DIP switches:
T otal 6 bits can be
configured.
Bit1~Bit5:
Used to User Code setting.
Bit6:
Set to ON
if the monitor is at the
end of the line or works with M-SM4.
Otherwise, set to OFF.
Terminal Description
1
2
sw+
sw-
RING
GND
NC
3
ON
L1
L2
DIP
4
5
6
1
2
SW+
SW-
RING
GND
NC
3
ON
L1
L2
DIP
4
5
6
4. Basic Door Release Operation
1. Press
CALL
button on outdoor station, the
Monitor rings, meanwhile, the screen displays the
visitors' image.
2. Press
Talk/Mon
Button on monitor, you
can communicate hands free with the visitor
for 90 seconds. After finishing communication,
press
Talk/Mon
button again(or press
Close
Button) to end the communication. If
nobody answers the phone, the screen will be turned off automatically after 40 seconds.
3. During talking state, Press
Unlock
Button to release the first door.
4. When the monitor is in standby mode, press
Talk/Mon
Button (or select
Monitor
By Select
button on main menu, press
Menu Button to confirm, and then it will
enter the select a camera page, then you can use
/
Button to select the camera you
want), the screen can display the view of outside.
1. Use the screws to fix the Mounting Bracket on the
mounting box.(fitting accesories
includes a Bracket (Two pieces of 4X25 screws are needed for fastening the Mounting
Bracket), Special 2 wire connectors to connect with Monitor)
2. Wire the system correctly(see the later connection
chapter) then hang the Monitor on
the Mounting Bracket firmly.
00:23
DS-1
3. Main Menu
Press
Menu
/
Close
button, in
standby mode, the main menu page will be
shown as follows:
4
5