Quick Guide for the V-Tap Analog 2
v2.9 © 2018-2021 Vidicode 2/4
HARDWARE INSTALLATION
–
TWO WAYS TO CONNECT TO A PHONE SYSTEM
1.
On an analog line, in between the wall and the phone:
2.
In between the handset and the phone:
NOTE1: USB must be connected for power supply and must deliver 500 mA.
NOTE2: An SD card must be inserted to store the recordings on (FAT32 formatted).
NOTE3: Optionally connect the network for web access and/or Tunnel function.
SETUP THROUGH THE WEB INTERFACE
•
When Wi-Fi is available and enabled on the V-Tap, search on your mobile phone or laptop for
the name “V
-
Tap…”, co
nnect to it using the 12 digits MAC address as the Wi-Fi password,
found on the bottom of the unit. Then open a browser and enter the IP: 192.168.55.66
•
When using a LAN cable, there are two ways to access the web interface:
1)
Start a browser and enter in the address line
http://vtapXXXX.local
XXXX
are the last 4 digits of the MAC address, found on the bottom of the unit.
For this V-Tap, enter
http://vtap019e.local
2)
Or enter an IP address on the first line of the text
file “IP”, put “
IP.TXT
”
onto an SD card
and insert the card into the V-Tap. Then enter this IP address in the browser.
