PAGE 4 of 24 AUDIO/VIDEO VANDAL RESISTANT TECHNICAL MANUAL
VER1.1
MANUAL INTRODUCTION
The information in this manual is intended as an installation and commissioning guide for
the standard range of vandal resistant door panels, to be used with standard AC buzzer
telephones or with vandal resistant video panels using the Art.890 controller. This manual
should be read carefully before the installation commences. Any damage caused to the
equipment due to faulty installations where the information in this manual has not been
followed is not the responsibility of Videx Security Ltd.
VIDEX run free training courses for engineers who have not installed this system before.
Technical help is also available on 0191 224 3174 during office hours or via e-mail
[email protected].
SYSTEM INTRODUCTION
This system can be used for single entrances or multiple entrances. The system has no
limit on the number of apartments for which it can control or the number of entrance points
that can be connected together, although we suggest using this system on small to
medium sized installation of no more than 20 apartments and three entrances.
SYSTEM COMPONENTS
A standard audio system will comprise of a door panel, power supply and audio
telephones. A standard video system will comprise of a door panel, video controller, power
supply, video splitters and videophones. The individual parts are described below.
DOOR PANELS
A vandal resistant door panel will consist of an amplifier module, button connector board
and ‘n’ number of buttons.
Speech volume adjustments are carried out at the door panel using a small trimmer driver.
Connection Function
Connection Function
1
Receive speech from apartment
LOCK
Spare connector terminals
2
Transmit speech to apartment
CB
Common of call buttons
3
+12Vdc input
A
Spare connection terminal
4
0V (Ground)
1
Call button 1 connection
2
Call button 2 connection
3
Call button 3 connection
4
Call button 4 connection
Camera module (Art.830 & 830C)
5
Call button 5 connection
Connection Function
6
Call button 6 connection
I
+20Vdc input 200mA
(400mA - 830C)
7
Call button 7 connection
F1
0V
8
Call button 8 connection
V
Centre core of coax video cable
9
Call button 9 connection
M
Screen of coax video cable
10
Call button 10 connection
SB
+8-12Vdc camera heater
TRADE
Trade button connections
Adjustment for
speech volume level
at the door station
Adjustment for
speech volume at the
apartment
Amplifier module (Art.437 or Art.537)
Connector PCB (CB)
